Fasteners Drilling (Greater Than 8MM)

Application

For fxing of horizontal / top metal roofng sheets to structural steel / secondary substrate is said to be roofng / crest fxing. The fxing is done on the crest / top of the metal sheet. Secondary substrate could be a cold rolled steel (Z/C purlins Square pipes, angles with thickness not more than 8mm).

Coating

A unique co-polymer coating that provides resistance than Zinc and Cadmium plating. Tested in accordance to ASTM B117 & AS 3566.

Material

Case hardened carbon steel Rustshield coating AISI 1022.

Head

Hex washer head 8mm.

Sealing Washers

EPDM Washer.

Accessories

Power fastener-gun speed under 2500 RPM.

EZI Find Description (GXTPIXL) Point Type Drill Thickness (mm) Box Pacing Carton Qty
Stitching Fastener HEX Washer Head
301 12G - 14TPIX30MM Fully Threaded drill tip #4 8 mm 250 3000
302 12G - 14TPIX40MM Fully Threaded drill tip #4 8 mm 250 3000
303 12G - 14TPIX45MM Fully Threaded drill tip #4 8 mm 250 2000
304 12G - 14TPIX60MM Fully Threaded drill tip #4 8 mm 200 1600

Common fastener sizes are mentioned above. For other sizes please contact us.

Fasteners Drilling (Greater Than 12MM)

APPLICATION

For fxing of horizontal / top metal roofng sheets to structural steel / secondary substrate is said to be roofng / crest Fixing. The fxing is done on the crest / top of the metal sheet. Secondary substrate could be a hot rolled steel (i.e. I beams/angels/channels with thickness varies from 4.5mm to 12mm). Carbon steel fasteners are designed for fastening metal sheet to heavy section steel framing up to thickness of 12mm steel with or without intermediate insulation layers.

COATING

A unique co-polymer coating that provides resistance than Zinc and Cadmium plating. Tested in accordance to ASTM B117 & AS 3566.

MATERIAL

Case hardened carbon steel Rustshield coating AISI 1022.

HEAD

Hex washer head 8mm.

SEALING WASHERS

EPDM washer.

ACCESSORIES

Power fastener-gun speed under 2500 RPM.

1R8A1506
EZI Find Description (GXTPIXL) Point Type Drill Thickness (mm) Box Pacing Carton Qty
Stitching Fastener HEX Washer Head
401 12G-24TPI x 32mm Fully Threaded drill tip 12.0 mm 250 3000
402 12G-24TPI x 38mm Fully Threaded drill tip 12.0 mm 250 3000
403 12G-24TPi x 50mm Fully Threaded drill tip 12.0 mm 250 2000
404 12G-24TPi x 65mm Fully Threaded drill tip 12.0 mm 200 1600
405 12G-24TPi x 70mm Fully Threaded drill tip 12.0 mm 200 1600

Common fastener sizes are mentioned above. For other sizes please contact us.